2019 Tsugami TMA8F

2019 Tsugami TMA8F
VERY Low Hours! Loaded with Tooling!

CAPACITY
Max machining diameter: 220 mm
Bar machining capacity: 65 mm
Max machining length: 580 mm
TRAVEL
X axis travel: 430 mm
Y axis travel: 130 mm (+60/-70mm)
Z axis travel: 580 mm
A axis travel: 750 mm
MAIN SPINDLE
Max spindle speed: 5000 min
Spindle end face: JIS A2-6
C axis least index angle: 0.001
Spindle chuck size: 8 inch
BACK SPINDLE
Max spindle speed: 5000 min
Spindle end face: 140 mm flat
C axis least index angle: 0.001
Spindle chuck size: 6 inch
TOOL SPINDLE
Spindle type: Single tool spindle with ATC
B axis indexing angle/Minimum indexing angle: -15 to 195/0.001
Tool spindle indexing angle/position: 90/4 positions
Tool size: 20 mm x 20 mm
Boring bar shank diameter: 32 mm
Tool spindle speed: 80 to 20000 min
Tool spindle bearing bore: front 60 mm/rear 55 mm
AUTOMATIC TOOL CHANGER
Tool shank shape: CAPTO C4
Number of tools stored: 60
Tool maximum diameter/length/mass: 60mm/200mm/4kg
Tool selecting method: Specified address random indexing
FEED FUNCTION
X axis rapid traverse rate: 30000 mm/min
Y axis rapid traverse rate: 24000 mm/min
Z axis rapid traverse rate: 40000 mm/min
A axis rapid traverse rate: 30000 mm/min
C1 axis rapid traverse rate: 300 min
C2 axis rapid traverse rate: 300 min
B-axis rapid traverse rate: 150 min
X axis cutting feed rate: 0.001 to 343 mm/rev
Y axis cutting feed rate: 0.001 to 343 mm/rev
Z axis cutting feed rate: 0.001 to 343 mm/rev
C1 axis cutting feed rate: 0 to 12000 deg/min
C2 axis cutting feed rate: 0 to 12000 deg/min
B axis cutting feed rate: 0 to 6000 deg/min
MOTOR
Main spindle: 18.5/11 kW
Back spindle: 7.5/5.5 kW
Tool spindle: 7.5/3.7 kW
X axis feed: 4.0 kW
Y axis feed: 3.0 kW
Z axis feed: 4.0 kW
A axis feed: 1.6 kW
B axis feed: 2.7 kW
T axis feed: 0.4 kW
ATC: 0.4 kW
Hydraulic pump: 2.2 kW
Lubrication pump: 19 W/ 18W
Spindle cooling pump: 0.4 kW
Coolant pump: 0.43/0.68 kW
TANK CAPACITY
Hydraulic pump: 60L
Lubrication pump: 2L
Lubrication tank for tool spindle: 1L
Coolant: 230L
MACHINE SIZE
Machine height: 2250 mm
Required floor area: 3700mm x 2125 mm
Machine mass: 8500 kg

INCLUDES:
100+ Toolholders
Filtermist
High Pressure Cool Blaster 1000 PSI
ATS 3J dead length collet chuck
Royal ATS 3J Collet Chuck
10" 3 jaw
8" 3 jaw

*CAN BE INSPECTED UNDER POWER*