18" X 48" CINCINNATI UNIVERSAL CYLINDRICAL GRINDER W/SWING DOWN I.D. GRINDING ATTACHMENT W/SPINDLE

18" X 48" CINCINNATI UNIVERSAL CYLINDRICAL GRINDER
W/SWING DOWN I.D. GRINDING ATTACHMENT W/SPINDLE

** "VERSAGRIND ATTACHMENT - SEE DESCRIPTION BELOW **

Versagrind® grinding attachments are an alternative way to grind and
finish HVOF and other thermal spray coatings. Using a improved method
for HVOF hard coat grinding and finishing with a new system
from Abbott and 3M,

Our Objectives are:
• Productivity, reduced cost, quality and more profitability for our customers
• Consistent and predictable process
• Able to easily achieve finish specifications
• Capable to delivering the required geometry tolerance
• Easy to use and adaptable solutions
• Faster dimension and finish attainment than with bonded wheels and honing stones.



MODEL: DE S/N: 3U6E5JN-1 REBUILT BY ABBOTT MACHINERY

SWING OVER TABLE ............................ 18-15/16"
DISTANCE BETWEEN CENTERS .......................... 48"
TABLE SWIVEL, TOWARD WHEELHEAD ............. 9 DEGREES
AWAY FROM WHEELHEAD ........... 2 DEGREES

GRINDING WHEELHEAD:
LOWER SWIVEL LEFT & RIGHT OF CENTER ............ 90 DEG.
UPPER SWIVEL, RIGHT & LEFT ..................... 30 DEG.
MOTOR .......................................... 5 HP
GRINDING WHEEL SIZE ....... 14" WHEEL DIA. X 1-1/2" X 5"

TABLE TRAVERSE:
INF. VARIABLE TABLE SPEEDS ............. 3" TO 220" IPM
HAND TABLE TRAVERSE PRE REVOLUTION OF HANDWHEEL
(RAPID/SLOW) ............................ 15/16" / 0.2"

CROSS FEED:
AUTOMATIC INFEED AT TABLE REVERSAL:
LOW ................................. 0.0002" TO .0005"
HIGH ................................. .0005" TO .0125"
WHEELHEAD MOVEMENT PER TURN OF HANDWHEEL:
LOW ............................................ 0.050"
HIGH ........................................... 0.250"
MINIMUM INFEED ON DIAMETER ................... 0.00005"

HEADSTOCK:
MOTOR ......................................... 1 H.P.
TAPER HOLE IN SPINDLES ........................ #10 B&S
INF. VARIABLE WORKHEAD SPEEDS .......... 50 T0 500 RPM
SPINDLE NOSE, AMERICAN STANDARD ................... 5"
HEADSTOCK SWIVEL, TOWARD WHEELHEAD ............ 90 DEG.
AWAY FROM WHEELHEAD ....... 30 DEG.

FLOOR SPACE REQUIRED FOR OPERATION:........ 72" X 185"
APPROX. DIMENSIONS:.......... 166" L-R, 72" F-B, 66" H
APPROX. MACHINE WEIGHT ...................... 12,800 LBS

HYDRAULIC OPERATION FEATURING:
-POWER TABLE TRAVERSE
-PICK FEED (AUTO INFEED)

MACHINE FEATURES:
WORKHEAD SPINDLE IS BOTH LIVE & DEAD
ELECTRICAL CABINET ATTACHED TO MACHINE, NOT SEPARATE

ACCESSORIES:
SWING DOWN I.D. ATTACHMENT W/SPINDLE
4-JAW CHUCK
2-POINT REST SUPPORT
"HEIDENHAIN" MODEL "ND 780" 1-AXIS DIGITAL READOUT DISPLAY,
FOR THE MOVEMENT OF THE WHEELHEAD
EXTERNAL COOLANT TANK/SYSTEM


REBUILT & RETROFITTED BY ABBOTT MACHINERY:
'VERSAGRIND" ATTACHMENT
DIGITAL DISPAY FOR GRINDING WHEEL SPEED
DIGITAL DISPLAY FOR HEADSTOCK SPEED
VARIABLE SPEED KNOB FOR I.D. & O.D WHEEL SPEED ADJUSTMENT
VARIABLE SPEED KNOB FOR HEADSTOCK SPEED ADJUSTMENT
"MARATHON ELECTRIC" "ULTRA HIGH EFFICIENCY"
1.5 H.P. MOTOR FOR WORKHEAD, 3/60/208-230-460 VOLTS
"MARATHON ELECTRIC" 7.5 H.P. MOTOR, 3/60/208-230-460 VOLTS,
FOR THE GRINDING WHEELHEAD
CV PIPING, FOR USE TO AN EXTERNAL COOLANT SYSTEM



** INSPECT UNDER POWER IN OUR HARRISON, NJ WAREHOUSE **
** REBUILT & RETROFITTED - SUPERIOR CONDITION & APPEARANCE **